Need help?Do you have a question about the HOLZMANN MASCHINEN ED 300ECO and is the answer not in the manual?
General| Model | ED 300ECO |
|---|---|
| Type | Lathe |
| Swing Over Bed | 300 mm |
| Center Height | 150 mm |
| Spindle Bore | 20 mm |
| Tailstock Quill Travel | 60 mm |
| Tailstock Quill Diameter | 25 mm |
| Voltage | 230 V |
Lists and identifies all machine components with corresponding numbers for reference.
Lists essential safety rules and warnings for operating the machine safely.
Defines the machine's proper applications and lists forbidden operations.
Details lathe-specific precautions and identifies remaining risk factors.
Instructions for starting, stopping, setting speed, and spindle rotation.
Explains how to operate the machine using manual controls for various slides.
Details automatic feed engagement and replacing change gears for feed rates.
Outlines regular maintenance tasks, including cleaning and lubrication intervals.
Lists typical problems like machine not starting, slow speed, vibration, and their causes/solutions.
To Next Page
