What to do if my Holzstar DB 900 motor does not start?
If the motor of your Holzstar Lathe doesn't start, there could be several reasons. First, check the mains fuse. If that's not the issue, the switch or capacitor might be defective, in which case you should have it checked by a qualified electrician. Also, examine the electrical extension conductor for any defects, and replace it if necessary after pulling the mains plug.
Why is the workpiece fluttering on my Holzstar Lathe?
If the workpiece is fluttering on your Holzstar Lathe, it could be due to a few reasons. The workpiece might be loosening during work, so observe the working instructions in the operating instructions. It could also be due to a lack of centering, so observe chapter 'Working instructions' in the operating instructions. Alternatively, the speed might be too high, so try selecting a lower speed.
What to do if the tool rest or tailstock can no longer be clamped on my Holzstar DB 900?
If you can no longer clamp the tool rest or tailstock on your Holzstar Lathe, it's likely that the eccentric clamp is too loose. Tighten the hexagon nuts on the underside, ensuring they are just in contact and not overly tightened.
Why are holes larger than the drill used on my Holzstar DB 900?
If holes are becoming larger than the drill used on your Holzstar Lathe, it indicates that the spindle head and tailstock are not parallel. Adjust the spindle head to the tailstock tip by inserting the face driver and the moving tailstock tip, pushing the tailstock forward, and aligning with the points.
General| Motor power | 0.75 kW |
|---|---|
| Tailstock taper | MT2 |
| Weight | 120 kg |
| Distance between centers | 900 mm |
| Spindle bore | 20 mm |
| Spindle speed | 70 - 2000 rpm |
| Spindle speed range | 70 - 2000 rpm |
Details copyright protections and usage restrictions for the manual.
Provides contact information for customer support and spare parts.
Outlines manufacturer liability limitations and disclaimers for product use.
Explains safety symbols and signal terms used to indicate risk levels.
Defines responsibilities of the operator for safe machine operation and staff training.
Specifies qualifications and precautions for personnel handling the lathe.
Details essential personal protective equipment (PPE) for safe operation.
Highlights the importance of observing safety labels on the machine.
General safety rules for machine operation, handling, and maintenance.
Specific safety guidelines tailored for wood lathe operation.
Lists potential hazards that may persist despite adhering to safety guidelines.
Information regarding the machine's type plate and its specifications.
Procedures for checking the lathe for transport damage and reporting issues.
Guidance on recycling and disposing of packaging materials.
Instructions for proper storage conditions to maintain machine integrity.
Identifies and labels various components of the lathe.
Lists all items included in the standard package.
Details optional accessories that can be purchased separately.
Specifies criteria for selecting a suitable installation location.
Steps for safely and correctly setting up the wood lathe.
Assembly instructions for the DB 900 model's frame and bed.
Assembly instructions for the DB 1100 model's base and bed.
Safe procedures for connecting the machine to the power supply.
How to adjust speed and factors influencing speed selection.
Instructions for mounting and replacing clamping tools like face plates.
Steps and safety warnings for adjusting the spindle head angle.
Procedure for adjusting and securing the tailstock.
Guidelines for positioning and adjusting the tool rest for optimal work.
Instructions for cleaning the machine safely and effectively.
Guidance on performing regular maintenance and contacting service.
Information on routine servicing and lubrication points.
Steps for safely decommissioning a machine before disposal.
Guidelines for responsible disposal of electrical components.
Advice on proper disposal methods for lubricants.
Information on returning electrical equipment to designated collection points.
How to order spare parts and required information.
Exploded view drawing of the DB 900 with part numbers for ordering.
Exploded view drawing of the DB 1100 with part numbers for ordering.
To Next Page
