Functional Description of Massager
I. Graphic presentation of Controller
1. POWER: turn on/off selection key
2. HEAT: heating on/off key
3.INTENSITY: High/Low
4. MODE: working mode
5. BACK: back massage
6.LUMBAR: lumbar massage function
7.THIGH: thigh massage function selection key
8.LEG: leg massage function selection key
9. TIMER: set working time key
II. Operating Instructions
• Insert the power into the DC socket
• Press the POWER key to start the unit, when the unit will
• enter the first mode to run for 15min
• in the medium step, with all the corresponding indicators
• illuminated.
• Press the HEAT key to select the heating function ON ,Press
• the key again switch off the heating
• function.
• Press the TIMER key, the unit’s control time will switch
• between 15min, 30min and 60min.
• Press the FUNCTION key to select different working modes
• (PULSE,PRESS,WAVE,AUTO,NORMAL)
• Press the INTENSITY key to select the high and low the
• intensity of vibration.
• Press the BACK, LUMBAR and THIGH key will to massage the
• different places of the body
To Next Page
Loading...
