HOMCOM A90-196 User Manual

Insert screws and finger tighten.
Connect each of the three wires from bike
to the control panel. Either of the 2 small
female connectors can connect to either of
the 2 small male connectors.
Tighten screws with included large hex
key/screwdriver tool.
Starting with the largest connector, feed
each of the three wires through the hole in
the center of hander bar bracket.
Place control panel onto the handle bar
bracket.

HOMCOM A90-196 Specifications

General

Brand	HOMCOM
Model	A90-196
Category	Exercise Bike
Language	English