4
.
Cable Hook: Hanging the power cord at cable hook when the fan is not be used.(Fig. 3)
Water filling and water tank clearance
ATTENTION
1.Please be sure the plug is taken off when you fill the water or cleaning.
2.Please clean the water that in the water tank when you do not use the product.
3.Turn the water tank latch to right or left at 90 degree to open the water tank. Then fill
the water into the water tank. (Fig. 4).
4.When fill the water, do not exceed ‘MAX’ level at water scale. At cooling mode, keep
the water at least at ‘MIN’ level. (Fig. 5)
5.Clean Water tank: Pull out the water tank to find water pump, then gently pinch the
pressure plate of the water pump, and take out the water pump and clean the water
tank directly ( Fig. 6)
6.Use the brush or tool to clean the water tank.
7.Don’t clean transducer by any metal or stiffness material or scrape it to avoid any
damage
8.Don't put acid, alkalescency, bleacher scour into water tank to avoid damage
9.Do not spray the water onto control panel and its surrounding, to avoid electrical
leakage accidents.
10. Do not open the cover of Ice Box, to avoid its leakage. The Ice Box is environmental
protection material that would storage in refrigerator and would use it repeatedly.
Fix the base on the fan body with four screws ( included), with a screwdriver, wise it
clockwise ( Fig. 2).
(Fig. 2)
(Fig. 3)
To Next Page
Loading...
Need help?
General
