Home Decorators Collection 51556 User Manual (English)

Questions and Answers:

Y
yquinnAug 2, 2025
What to do if my Home Decorators Collection Fan will not start?
- M
  Melanie ObrienAug 2, 2025
  If your Home Decorators Collection Fan isn't starting, begin by checking the main and branch circuit fuses or breakers. Then, inspect the line wire connections to the fan and the switch wire connections in the switch housing. Also, verify the battery in the remote control and make sure you are within the 10-20 feet range. Before making any checks, remember to turn off the power supply and check the dip switch settings.
J
jose66Aug 13, 2025
Why is my Home Decorators Collection Fan so noisy?
- C
  Christina JonesAug 13, 2025
  A noisy Home Decorators Collection Fan can be caused by several factors. First, ensure all motor housing screws are snug and that the screws attaching the fan blade bracket to the motor hub are tight. Check that the wire nut connections are not rattling against each other or the interior wall of the switch housing. Allow a 24-hour 'breaking in' period, as most noises disappear during this time. If you're using a light kit, ensure the screws securing the glassware and the light bulbs themselves are tight. Make sure the canopy is not touching the ceiling. Finally, ensure your outlet box is secure and rubber isolator pads were used between the mounting plate and outlet box.
T
Tammy OconnorAug 21, 2025
How to fix a wobbling Home Decorators Collection Fan?
- V
  Vincent WarrenAug 22, 2025
  To address a wobbling Home Decorators Collection Fan, start by checking that all blade and blade arm screws are secure. Most wobble issues arise from unequal blade levels. To check this, measure from a point on the ceiling above the tip of one blade to the center of the blade, and repeat for each blade, ensuring any deviation is within 1/8 inch. Run the fan for ten minutes. If the fan continues to wobble, please contact Customer Service and a balancing kit will be sent to you at no charge.