To Next PageTo Next PageWhat to do if my Home Decorators Collection YG908A-MBK Fan remote control is not working?
First, ensure that the fan is not connected to any wall-mounted variable speed controls. Check that the frequency switches are correctly set. You may also need to reset the transmitter by performing the “LEARNING PROCESS”.
What to do if my Home Decorators Collection YG908A-MBK Fan will not start?
If your Home Decorators Collection Fan isn't starting, check the main and branch circuit fuses or breakers. Inspect the line wire connections to the fan and the switch wire connections in the switch housing. Ensure the frequency switches on both the remote control and receiver are set to the same frequency. Try turning the AC power off, waiting 10 seconds, and then turning it back on. You can also reset the transmitter by going through the transmitter’s “LEARNING PROCESS”.
Why is my Home Decorators Collection YG908A-MBK wobbling?
Most fan wobble issues are due to loose parts. First, make sure all blades and blade bracket screws are secure. After proper installation, let the ceiling fan run for 10 minutes to self-adjust. If wobbling continues, check the blade level by measuring the distance from each blade to a point on the ceiling. Deviations should be within 1/8 inch. If deviations exceed 1/8 inch, contact Customer Service at 1-800-986-3460 to order complimentary bracket replacements. If deviations are less than 1/8 inch and the fan still wobbles, call Customer Service to order a complimentary Blade Balancing Kit.
How to fix a noisy Home Decorators Collection YG908A-MBK?
To reduce noise from your Home Decorators Collection Fan, ensure all motor housing screws are snug and that the screws attaching the fan blades to the motor hub are tight. Also, check that wire nut connections are not rattling against each other or the switch housing's interior wall. Allow a 24-hour "breaking-in" period for new fans, as most noises disappear during this time. If you're using a ceiling light kit, make sure the glassware is tightly secured. Ensure there's a small gap between the ceiling and the canopy, so it doesn't touch the ceiling. Finally, confirm that your ceiling box is secure and that rubber isolator pads are used between the mounting bracket and the outlet box.
Why does my Home Decorators Collection YG908A-MBK Fan move backwards and forwards when turned on?
The partial movement during start-up is the result of the DC motor aligning the internal magnetic poles for proper motor operation. This design saves electricity and allows the fan to operate much quieter than standard AC motor fans.
General| Brand | Home Decorators Collection |
|---|---|
| Model | YG908A-MBK |
| Category | Fan |
| Language | English |
Instructions and diagrams for different outlet box mounting methods.
Instructions for attaching the mounting bracket to the electrical box.
Instructions for lifting and seating the fan motor assembly onto the bracket.
Detailed steps for wiring the fan, receiver, and house wiring.
Steps to install the fan canopy and secure it to the mounting bracket.
Instructions for attaching the fan blades to the motor assembly.
