14
TROUBLESHOOTING TIPS
Solution
Improper installation. Tilt air conditioner slightly to the outside to allow water
drainage. Refer to installation instructions - check with installer.
Unit removing large quantity of moisture from humid room. This is normal during
excessively humid days.
Remote control not located within range. Place remote control within 20 feet &
180
O
radius of the front of the unit.
Remote control signal obstructed. Remove obstruction.
Set temperature too low. Increase set temperature.
Problem
Water dripping INSIDE
when unit is cooling.
Water dripping OUTSIDE
when unit is cooling.
Remote Sensing Deactivating
Prematurely (some models).
Room too cold.
Before calling for service, review this list. It may save your time and expense. This list includes common occurrences that
are not the result of defective workman-ship or materials in this appliance.
To Next Page
Loading...
