11
NORMAL SOUNDS
AIR CONDITIONER FEATURES
AIR DIRECTIONAL LOUVERS
CAUTION
NOTE
WARNING
All the illustrations in this manual are for explanation purpose only. Your air conditioner may be slightly different.
The actual shape shall prevail.
To reduce the risk of re, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS
before operating this appliance.
The louvers will allow you to direct the air ow Left or
Right throughout the room as needed.
Move the Levers from side to side until the desired
Left/Right direction is obtained.
Please always wait 3 minutes when turning unit off
then on again, and when changing from cool to fan
and back to cool. This prevents compressor from
overheating & possible circuit breaker tripping.
To begin operating the air conditioner, follow these steps:
1. Set the thermostat to the highest number (coldest or
cooler setting).
2. Set the selector control to the highest COOL setting.
3. Adjust the louver for comfortable air ow (see Air
Directional Louvers).
4. Once the room has cooled, adjust the thermostat to
the setting you nd most comfortable.
5. Make sure that the air ow inside and outside are not
obstructed by anything.
Air Direction
Lever
FOAM SEAL
Unit may vibrate and make
noise because of poor wall or
window construction or incorrect
installation.
HIGH PITCHED CHATTER
High efciency compressors may
have a high pitched chatter during the
cooling cycle.
SOUND OF RUSHING AIR
At the front of the unit, you may
hear the sound of rushing air being
moved by the fan
GURGLE / HISS
“Gurgling or hissing” noise may be
heard due to refrigerant passing
through evaporator during normal
operation.
PINGING OR SWITCHING
Droplets of water hitting
condenser during normal
operation may cause “pinging or
switching” sounds.
To Next Page
Loading...
