Home HME020379N - Water Drainage and Remote Control; Water Drainage Procedure; Remote Control Specifications

14 15
OPERATION
WATER DRAINAGE

mender) with ¾" hose (locally purchased). For the models without the drain connector, just attach the Drain Hose to the hole. Place

-When you set the humidity level, put the Drain Hose in the water outlet for the best dehumidifying effect. You don't have to connect
the duct to the window.
NOTE: Make sure the hose is secure so there are no leaks. Place the hose directly toward the drain, making sure that there are no



-When the water level of the bottom tray reaches a predetermined level, the unit beeps 8 times and the digital display shows "P1".

is normal). Carefully move the unit to the drain location, remove the bottom drain plug, and let the water drain away. Reinstall the
bottom drain plug and restart the machine until the "P1" symbol disappears. If the error repeats, call a service agent or a professional
to repair the unit.
NOTE:
Remove the
upper drain plug
Continuous
drain hose
REMOTE CONTROL
Applied Model: HME020379N, HME020235N

Signal Receiving Range: 8m
Operating environment: -5C~60C (23F~140F)
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote control. For instructions on how to operate
your air conditioner, refer to the How to Use Basic Functions section of this manual.
ON/OFF
Turns the unit on or off.
TEMP
Increases temperature in 1°C
(1°F) increments.
Max 30°C (86°F) .
TEMP
Decreases temperature in
1°C (1°F) increments.
Min 17°C (62°F).
SHORTCUT
Sets and activates your
favorite pre-settings.
TIMER ON
Sets timer to turn the unit
on.
TIMER OFF
Sets timer to turn the unit
off.
FAN SPEED
Selects fan speeds in the
following order:
AUTO → LOW → HIGH
NOTE: MED is optional.
SLEEP
Saves energy during
sleeping hours.
SWING
Starts and stops
air outlet door
movement.
LED
Turns LED display on and off.
If you are sensitive to light
when you go to sleep, you
can press the LED button to
turn off the LED display. Press
the button again to turn it on.
MODE
Scrolls through operation
modes as follows:
AUTO → COOL → DRY →
FAN
On/Off
Mode
Timer
On
Short
cut
Timer
Of
f
Fan
Temp
Sleep
Swing LED
SPECIFICATIONS & FUNCTION BUTTONS