9
Installation
3. Fix the ornamental plate
ST 0.16×1.7wooden screw
0.16×1.7wooden screw
ornamental plate (4.4~11Ib)
The plug with T shape
2-0.16×1wooden screw
Remove 2-ST 0.16
×
0.4 screw
Dishwasher door
remove 2-ST0.16×0.4 screw
ornamental plate (4.4~11Ib)
ST 0.16×1.7 wooden screw
The plug with T shape
0.16×1.7 wooden screw
2-0.16×1 wooden screw
4. Tension adjustment of the door spring
After placing the panel on the dishwasher, check the balance of the door. Try open and close the door to
check whether the door can remain at the same place. If not, adjust the screw to adjust the balance of
the door.
Hexnut tools
CR-V 0.16in
-
+
To Next Page
Loading...
