19
2. PREPARE THE AIR CONDITIONER
The top rail must be assembled prior to installing the air
conditioner in the window.
Tools Needed: Phillips Screw Driver
Top Rail Hardware Qty
3/8" Screw 4
Top Rail 1
Weather Stripping
(10 × 3/4 × 1/12")
1
Aaching the Top Rail to the Air Conditioner
1. Remove the air conditioner from the carton and place it
on a flat surface.
2. Remove the top rail and weather stripping from the
packaging material as shown in Fig. A
3. Align the hole in the top rail with those in the top of the
unit as shown in Fig. B
4. Secure the top rail to the unit with the 3/8” Screws as
shown in Fig. C
NOTE:
• For safety reasons, all the four (4) screws MUST be
securely fastened.
• The top rail hardware is pre-installed for units more than
10000Btu/h. Before installing this unit, the top rail must
be assembled on the unit (For <10000Btu/h models only).
NOTE:
For safety reasons, all 4 screws must
be fastened to the top rail.
Packaging Top Rail
Fig. A
Fig. B
Fig. C
Installation
To Next Page
Loading...
