Home HME030524N - Operating Instructions; Control Panel Overview

22
Operating Instructions
CONTROL PANEL
1
2
3 4 5 7 8 9
10
6
1. Power Buon: Press to turn the air conditioner on or off.
2. Smart Buon (Some models): Press to pair the unit with your mobile phone, then you can operate
the unit through an APP on your mobile phone.
3. Mode Buon: Press to cycle through the various modes: Cool, Dry, Fan, and Auto.
4. Eco Buon: Press this button to activate or deactivate the energy saving mode. This feature is only
available in COOL, DRY, and AUTO mode. When ECO mode is activated, the compressor will shut off,
and the fan will continue to run for 3 minutes. Then the fan will cycle on for 2 minutes in 10 minute
intervals until the room temperature exceeds the set temperature. The compressor will turn back
on, and cooling will start.
5. Filter Buon: The indicator above this button will light up to remind you to clean the filter. To turn
off the indicator, press the Filter button.
6. Up and Down Buons: Temperature setting: 62°F ~ 86°F (17°C ~ 30°C). Temperature unit conversion
(°C/°F): Hold both the Up and Down buttons for 3 seconds. Timer setting: Press repeatedly to set
the time.
7. Sleep Buon: Press to activate or cancel the Sleep feature.
8. Timer Buon: Press to activate or cancel the timer on or timer off feature. When auto-on is
activated (or deactivated), the ON indicator above the TIMER button will light up (or turn off). When
auto-off is activated (or deactivated), the OFF indicator above the TIMER button will light up (or turn
off). To set the value of the timer, press the Up and Down buttons. To cancel the timer, set the time
to 0 hour.
9. Speed Buon: Press to select the fan speed: High, Medium, Low, or Auto. Note: Auto speed is not
available in Fan mode.
10. Digital Display: When the timer is not in use, the operation mode and the set temperature will be
displayed. Time will be displayed under the timer setting.