Home HME030524N - Remote Control Operation

23
Operating Instructions
REMOTE CONTROL
1
3
5
6
8 9
10
11
12
7
2
4
Baery Size: AAA
NOTE: Do not mix old and new batteries or
different types of AAA batteries.
1. TEMP /
Use these buttons to set the temperature or
timer. The temperature range is 62°F-86°F
(17°C-30°C). If the room temperature is too
high or too low, “HI” or “LO” will be displayed
on the screen.
2. POWER
Press to turn the air conditioner on or off.
3. MODE
Press to cycle through the various modes:
Cool, Dry, Fan, and Auto.
4. SLEEP
Press to activate or cancel the SLEEP
function.
5. FOLLOW ME
Press to access the FOLLOW ME feature.
Refer to the FOLLOW ME SETTING section of
this manual for details.
6. °C/°F
Press to change the temperature display
between °C and °F.
7. LOCK
Press both the °C/°F and TIMER OFF buttons
for 5 seconds to lock the keypad. Press the
two buttons for 2 seconds to unlock the
keypad.
8. SMART (Some models)
Press to pair the unit with your mobile phone,
then you can operate the unit through an APP
on your mobile phone. To activate the SMART
function (pairing), press the SMART button 7
times continuously. The display will show "AP"
and the unit will enter pairing mode. To turn
on or turn off the display, press the SMART
button once.
9. ECO
Press this button to activate or deactivate the
energy saving feature.
10. TIMER OFF
Press to activate the auto-off feature.
11. TIMER ON
Press to activate the auto-on feature.
12. FAN SPEED
Press the SPEED button for various fan speed
options. You can choose from High, Medium,
Low, and Auto.