HoMedics BPW-201 - User Manual

Other manuals for HoMedics BPW-201

Questions and Answers

J
Jennifer HallAug 15, 2025
What to do if the HoMedics Blood Pressure Monitor shows EE error?
- J
  Johnny DavisAug 15, 2025
  If your HoMedics Blood Pressure Monitor displays the EE error symbol or shows blood pressure values that seem too low or high, it could be due to a few reasons. First, make sure the cuff is wrapped properly and positioned correctly. Also, avoid talking or moving during the measurement; try again while keeping your wrist steady. Shaking your wrist with the cuff on can also cause this error.
A
adam17Aug 18, 2025
How to fix a HoMedics Blood Pressure Monitor that won't turn on?
- S
  shepardangelaAug 18, 2025
  If your HoMedics Blood Pressure Monitor isn't turning on when you press the START/STOP button, it's likely due to one of two reasons: either the batteries have run down and need to be replaced with two new AAA alkaline batteries, or the batteries have been inserted incorrectly and need to be re-inserted in the correct positions.
A
arthur09Aug 21, 2025
What to do if HoMedics BPW-201 Blood Pressure Monitor displays E2 error?
- T
  timothy48Aug 21, 2025
  If your HoMedics Blood Pressure Monitor shows the E2 error symbol, it means the inflation pressure exceeded 300 mmHg. To resolve this, switch the unit off, and then measure again.
J
John DavisAug 25, 2025
Why does my HoMedics Blood Pressure Monitor show E3 error?
- M
  Margaret JohnsonAug 25, 2025
  If your HoMedics Blood Pressure Monitor displays the E3 error symbol, it indicates an error in determining the measurement data. The suggested solution is to measure again.
P
pmurrayAug 27, 2025
What does E1 error mean on HoMedics BPW-201 Blood Pressure Monitor?
- M
  millerclaytonAug 27, 2025
  If your HoMedics Blood Pressure Monitor shows the E1 error symbol, it indicates an air circuit abnormality. The suggested solution is to measure again.
D
Daniel KimAug 30, 2025
What to do if HoMedics BPW-201 shows EE measurement error?
- M
  Michele WheelerAug 30, 2025
  If your HoMedics Blood Pressure Monitor displays the EE error, it could be due to incorrect cuff placement. Ensure the cuff is wrapped properly and positioned correctly. Also, avoid talking or moving during the measurement. Keep your wrist steady and measure again. Shaking your wrist with the cuff on can also cause this error.
R
Rickey WeissSep 2, 2025
How to fix HoMedics Blood Pressure Monitor that won't turn on?
- C
  Carlos PalmerSep 2, 2025
  If your HoMedics Blood Pressure Monitor does not turn on, the batteries may be depleted. Replace them with two new AAA alkaline batteries. Also, ensure that the batteries are inserted with the correct polarities.
W
walterdarleneSep 5, 2025
What to do if HoMedics BPW-201 shows E2 error?
- C
  Christopher HigginsSep 5, 2025
  If your HoMedics Blood Pressure Monitor displays the E2 error symbol, it means the inflation pressure exceeded 300 mmHg. Switch the unit off, then measure again.
B
bakerjasonSep 8, 2025
What does E3 error mean on HoMedics Blood Pressure Monitor?
- C
  Christian JensenSep 8, 2025
  If your HoMedics Blood Pressure Monitor displays the E3 error symbol, it means there was an error determining measurement data. Please, try measuring again.
E
eric51Sep 12, 2025
Why does my HoMedics BPW-201 show EP error?
- C
  Charles ChaneySep 12, 2025
  If your HoMedics Blood Pressure Monitor displays the EP error symbol, it indicates a system error. The suggested solution is to measure again.

HoMedics BPW-201 Specifications

General

Model	BPW-201
Category	Blood Pressure Monitor
Type	Wrist
Technology	Oscillometric
Systolic Range	60-260 mmHg
Diastolic Range	40-199 mmHg
Accuracy Pressure	±3 mmHg
User Profiles	2
Irregular Heartbeat Detection	Yes
WHO Indicator	Yes
Power Source	2 AAA batteries
Display	LCD
Automatic Shut-off	Yes
Pulse Range	40-180 bpm
Accuracy Pulse	±5%
Cuff Size	5.3"-8.5" (13.5 cm - 21.5 cm)