21
1
2
3
1010
1
2
8
2
1
2
4
1
3
STARTING A COLD ENGINE
1. Loosen the fuel cap slowly by turning it
counterclockwise. Remove the fuel cap.
Pour the fuel mixture carefully into the
tank. Replace and tighten the fuel cap.
2. Set the 2 switches to “I“ (ON) position.
3. Press the primer bulb 10 times. Set the
choke lever to “FULL“ position.
4. Squeeze the throttle trigger. Pull the
starter grip until the engine attempts to
start. Do not pull the starter grip more
than 8 times.
To Next Page
Loading...
Need help?
General