33
2
3
1
1
2
3
1
2
3
4
B4
3
B3
2
20180328v1d8
B3. Close the vacuum inlet door and secure
with the securing screw.
B4. To remove the vacuum bag and adaptor,
pull off the metal contact, twist the
adaptor counterclockwise, and then
remove the vacuum bag and adaptor
from the blower housing outlet.
2. Loosen the fuel cap slowly by turning
counterclockwise, and then drain all fuel
from the tank into a container approved
for fuel. After draining all the fuel, replace
the fuel cap and tighten by turning it
clockwise.
3. Store blower/vacuum and its parts in a
cool dry and well-ventilated place that is
inaccessible to children.
To Next Page
Loading...
Need help?
General