EasyManua.ls Logo

Homelite RANGERTM 33CC UT74020 User Manual

Homelite RANGERTM 33CC UT74020
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Chain Saw / Scie De Chaine / Motosierra
OPERATOR'S MANUAL
MANUEL DU PROPRIÉTAIRE
MANUAL PARA EL OPERADOR
PS 06162
7-02
Ranger™ 33cc 16" UT74020
Homelite Consumer Products, Inc.
1428 Pearman Dairy Road
Anderson, SC 29625

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Homelite RANGERTM 33CC UT74020 and is the answer not in the manual?

Homelite RANGERTM 33CC UT74020 Specifications

General IconGeneral
Engine Displacement33 cc
Bar Length16 in
Oil Capacity6.8 fl oz
Chain Pitch3/8 in
Chain Speed13.5 m/s
Chain Gauge0.050 inches

Summary

Operator's Manual

Symbol Definitions

Precautions Against Kickback

Kickback Warning

Warning about the dangerous reaction of kickback, which can lead to serious injury.

Recommended Bar and Chain Combinations

Maintaining Starting and Cutting Performance

Instructions for maintaining easy starting and cutting performance, especially before storage.

State and Local Requirements

Basic Safety Precautions

Push and Pull

Explains how to control the saw's reaction force when cutting on the top or bottom edge of the bar.

Refueling

Kickback

Maintenance

In the Cutting/Work Area

Safety precautions for the area where cutting operations are performed.

Understanding Your Chain Saw Safety Devices

SAFE-T-TIP® Anti-Kickback Nose Guard

Explains the function of the SAFE-T-TIP® nose guard in preventing kickback.

Front Hand Guard

Describes the front hand guard and its purpose in preventing hand slips.

The Owner's Manual

Emphasizes the importance of reading the owner's manual for safety and proper use.

Installing the SAFE-T-TIP® Nose Guard

Instructions for properly installing and tightening the SAFE-T-TIP® nose guard.

Low Kickback Saw Chain

Homelite Guide Bars

Information on Homelite guide bars and their compatibility with low kickback chains.

Chain Brake

Explains the function of the chain brake in stopping chain rotation, but not preventing kickback.

Guide Bar and Chain Assembly

Chain Tension

Preparing For Use

Fueling

Instructions on proper fuel mixing and handling for the 2-stroke engine.

Chain Oil System

Information on using and filling the chain oil system for lubrication.

Starting and Stopping

Special Starting Situations

Guidance for starting the engine under special conditions, like when it's warm.

Preparation For Cutting

Proper Grip on Handles

Instructions on maintaining a safe and proper grip on the saw handles for control.

Proper Cutting Stance

Basic Cutting Procedure

Step-by-step guide for performing basic cutting operations safely and effectively.

Work Area Precautions

Tree Felling

Bucking

Types of Cutting Used

Describes different cutting techniques used during bucking operations.

Limbing and Pruning

Springpoles

Warning and explanation of springpoles and the danger they pose.

Bar and Chain Maintenance

How to File the Cutters

Top Plate Angle

Guidance on achieving the correct top plate angle for efficient cutter filing.

Side Plate Angle

Information on the correct side plate angle for filing cutters to prevent kickback.

Raker (Depth Gauge) Clearance

Guide Bar

Instructions for maintaining the guide bar, including reversal and checking for wear.

Air Filter Maintenance

To Inspect and Clean or Replace the Air Filter

Step-by-step guide for inspecting, cleaning, or replacing the air filter.

Spark Arrestor

Spark Plug

Information on the recommended spark plug type and replacement intervals.

Fuel Cap

Warning about leaking fuel caps and the need for immediate replacement.

Limited Warranty

Related product manuals