EasyManua.ls Logo

Homelite UT10544 - User Manual

Homelite UT10544
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
UT10544, UT10546 / 14 in. 35cc Chain Saw
Scie à chaîne de 35 cc de 356 mm (14 po)
Motosierra de 35 cm (14 pulg.), 35 cc
UT10564, UT10566 / 16 in. 38cc Chain Saw
Scie à chaîne de 38 cc de 406 mm (16 po)
Motosierra de 40 cm (16 pulg.), 38 cc
UT10584, UT10586 / 18 in. 42cc Chain Saw
Scie à chaîne de 42 cc de 457 mm (18 po)
Motosierra de 45 cm (18 pulg.), 42 cc
(ALL VERSIONS)
(TOUTES LES VERSIONS)
(TODAS LAS VERSIONES)
ENGINE/EVAP. FAMILY: *HCPS.0424BD
FAMILLE DE MOTEUR/ÉVAPORATEUR : *HCPS.0424BD
FAMILIA DE MOTOR/EVAPORADOR: *HCPS.0424BD
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your chain saw has been engineered and manufactured to Homelite’s high standard for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Thank you for buying a Homelite product.
Cette scie à chaîne a été conçue et fabriquée conformément aux
strictes normes de fiabilité, simplicité d’emploi et sécurité d’utilisation
de Homelite. Correctement entretenue, elle vous donnera des
années de fonctionnement robuste et sans problème.
AVERTISSEMENT : Pour réduire les risques de
blessures, l’utilisateur doit lire et veiller à bien comprendre le
manuel d’utilisation avant d’employer ce produit.
Merci d’avoir acheté un produit Homelite.
Su motosierra ha sido diseñada y fabricada de conformidad con
las estrictas normas de Homelite para brindar fiabilidad, facilidad
de uso y seguridad para el operador. Con el debido cuidado, le
brindará muchos años de sólido y eficiente funcionamiento.
ADVERTENCIA: Para reducir el riesgo de lesiones,
el usuario debe leer y comprender el manual del operador antes
de usar este producto.
Le agradecemos la compra de un producto Homelite.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS

Other manuals for Homelite UT10544

Questions and Answers

  • W
    William SchmidtJul 30, 2025
    How to start a Homelite UT10544 Chainsaw that won't start?
    • M
      Mark MooreJul 30, 2025
      If your Homelite Chainsaw engine won't start, it could be due to no spark or a flooded engine. First, clean or replace the spark plug and reset the spark plug gap. With the on/stop switch OFF, remove the spark plug. Move the choke lever to the RUN position (pushed in completely) and pull the starter cord 15 to 20 times to clear excess fuel. Clean and reinstall the spark plug. Set the on/stop switch to the RUN position. Push and fully release the primer bulb 7 times. Pull the starter three times with the choke lever at RUN. If the engine doesn't start, move the choke lever to FULL CHOKE and repeat the normal starting procedure. If it still fails, repeat the procedure with a new spark plug.
  • R
    Raymond EllisAug 4, 2025
    How to fix Homelite UT10544 that starts but will not run properly at high speed?
    • C
      Crystal MorrisAug 5, 2025
      If your Homelite Chainsaw starts but will not run properly at high speed, the carburetor likely requires adjustment. Contact an authorized service center for carburetor adjustment.
  • D
    David WhiteAug 11, 2025
    Why does my Homelite Chainsaw engine emit excessive smoke and not reach full speed?
    • B
      Bryan ClineAug 11, 2025
      If your Homelite Chainsaw engine doesn't reach full speed and/or emits excessive smoke, it might be due to an incorrect lubricant/fuel mixture or a dirty air filter. Use fresh fuel and the correct 2-cycle lubricant mix ratio. Also, clean the air filter.
  • M
    Michael GillespieAug 17, 2025
    What to do if Homelite Chainsaw starts but will not accelerate properly?
    • T
      Teresa ThompsonAug 17, 2025
      If your Homelite Chainsaw starts but won't accelerate properly, the carburetor likely requires adjustment. Contact an authorized service center for carburetor adjustment.
  • D
    Daniel RosarioAug 23, 2025
    Why does my Homelite Chainsaw engine start, then die?
    • R
      robert09Aug 25, 2025
      If your Homelite Chainsaw engine starts and then dies, it's likely that the carburetor requires adjustment. Contact an authorized service center for carburetor adjustment.

Summary

General Safety Rules

Kickback and Safe Operating Practices

Guidance on understanding kickback, maintaining a firm grip, avoiding obstructions, and safe operational techniques.

General Safety Rules (Continued)

Specific Safety Rules

Operation: Applications and Fueling

Operation: Fueling the Tank

Operation: Lubrication and Starting

Operation: Engine Starting Procedures

Cold and Warm Engine Starting Steps

Detailed steps for starting a cold engine and a warm engine, including choke and primer bulb usage.

Operation: Stopping and Idle Adjustment

Operation: Cutting Techniques

Pull and Push Cuts and Kickback

Explanation of pull/push cutting forces and detailed warnings about kickback reactions and their causes.

Operation: Grip and Kickback Precautions

Proper Grip and Kickback Danger Zone

Guidelines for maintaining a proper grip on handles and understanding the kickback danger zone for safe operation.

Operation: Cutting Stance and Work Area

Operation: Felling Trees

Felling Trees: Hazardous Conditions and Procedure

Covers hazardous conditions, escape routes, and the proper procedure for felling trees safely.

Operation: Felling Details and Root Removal

Felling Backcuts, Wedges, and Buttress Roots

Instructions for backcuts, using wedges, and removing buttress roots as part of tree felling.

Operation: Bucking Logs

Bucking Techniques and Kickback

Guidance on bucking logs, supporting small logs, and preventing kickback during these operations.

Operation: Bucking Under Stress

Overbucking and Underbucking Techniques

Explains techniques for overbucking and underbucking logs, especially those under stress, for safe cutting.

Operation: Limbing and Springpoles

Maintenance: General and Lubrication

Maintenance: Replacing Bar and Chain

Maintenance: Chain Tensioning

Maintenance: Chain Tension Adjustment

Maintenance: Chain Care

Maintenance: Cutter Sharpening

Sharpening Cutter Teeth Angles

Instructions on filing cutter teeth to specified angles and lengths for optimal cutting performance.

Maintenance: Filing Angles and Depth Gauge

Top Plate, Side Plate, and Depth Gauge Adjustments

Details correct filing angles for top plate, side plate, and maintaining depth gauge clearance for safe cutting.

Maintenance: Guide Bar and Nose Guard

Maintenance: Air Filter Cleaning

Maintenance: Engine and Carburetor

Maintenance: Engine Component Cleaning

Maintenance: Filters, Spark Plug, and Brake

Troubleshooting: Starting and Acceleration Issues

Engine Start and Acceleration Problems

Solutions for engines that won't start, are flooded, or fail to accelerate properly due to carburetor or spark plug issues.

Troubleshooting: Running and Chain Issues

Engine Idle, Chain Rotation, and Tensioning Problems

Addresses issues with engine idling, chain rotation, overheating, and difficulties with chain tensioning or brake adjustment.

Homelite UT10544 Specifications

General IconGeneral
BrandHomelite
ModelUT10544
CategoryChainsaw
LanguageEnglish

Related product manuals