Page 7 — English
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
Safety Alert Indicates a potential personal injury hazard.
Read Operator’s Manual
To reduce the risk of injury, user must read and
understand operator’s manual before using this
product.
Wear Eye and Head
Protection
Always wear eye protection with side shields marked
to comply with ANSI Z87.1, along with head protection.
SAFE-T-TIP Nose Guard
The SAFE-T-TIP nose guard on the guide bar helps
prevent rotational kickback.
No Smoking No smoking, sparks, or open flame.
Operate With Two Hands Hold and operate the saw properly with both hands.
One Handed Do not operate the saw using only one hand.
Carbon Monoxide
Engines produce carbon monoxide which is an
odorless, deadly poison. Do not operate in an
enclosed area.
Kickback DANGER! Beware of kickback.
Bar Nose Contact Avoid bar nose contact.
Wear Gloves
Wear non-slip, heavy-duty protective gloves when handling
the chain saw.
Wear Safety Footwear
Wear non-slip safety footwear when using this
equipment.
Gasoline and
Lubricant
Use unleaded gasoline intended for motor vehicle
use with an octane rating of 87 [(R + M)/2] or higher.
This product is powered by a 2-cycle engine and
requires pre-mixing gasoline and 2-cycle lubricant.
KeepBystandersAway Keepallbystandersandanimalsatleast50ft.away.
SYMBOLS
To Next Page
Loading...
Need help?
General