EasyManua.ls Logo

Homelite UT10640 - User Manual

Homelite UT10640
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your chain saw has been engineered and manufactured to our high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using
this product.
Cette scie à chaîne a été conçue et fabriquée conformément
aux strictes normes de fiabilité, simplicité d’emploi et sécurité
d’utilisation. Correctement entretenue, elle vous donnera des années
de fonctionnement robuste et sans problème.
AVERTISSEMENT : Pour réduire les risques de
blessures, l’utilisateur doit lire et veiller à bien comprendre le
manuel d’utilisation avant d’employer ce produit.
Su motosierra ha sido diseñada y fabricada de conformidad con
las estrictas normas para brindar fiabilidad, facilidad de uso y
seguridad para el operador. Con el debido cuidado, le brindará
muchos años de sólido y eficiente funcionamiento.
ADVERTENCIA: Para reducir el riesgo de lesiones,
el usuario debe leer y comprender el manual del operador antes
de usar este producto.
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
To register your Homelite product, please visit:
http://register.homelite.com/
Pour enregistrer votre produit de Homelite, s’il vous
plaît la visite: http://register.homelite.com/
Para registrar su producto de Homelite,
por favor visita: http://register.homelite.com/
NOTICE AVIS AVISO
Do not use E15 or E85 fuel (or fuel
containing greater than 10% ethanol)
in this product. It is a violation of federal
law and will damage the unit and void your warranty.
Ne pas utiliser d’essence E15 ou E85 (ou un carburant
contenant plus de 10 % d’éthanol) dans ce produit. Une
telle utilisation représente une violation de la loi fédérale et
endommagera l’appareil et annulera la garantie.
No utilice combustibles E15 o E85 (ni combustibles que
contengan más de 10 % de etanol) con este producto. Esto
constituye una violación a la ley federal, dañará la unidad
y anulará la garantía.
UT10640 / 14 in. 42cc Chain Saw
Scie à chaîne de 42 cc de 356 mm (14 po)
Motosierra de 356 mm (14 pulg.), 42 cc
UT10660 / 16 in. 42cc Chain Saw
Scie à chaîne de 42 cc de 406 mm (16 po)
Motosierra de 406 mm (16 pulg.), 42 cc
UT10680 / 18 in. 42cc Chain Saw
Scie à chaîne de 42 cc de 457 mm (18 po)
Motosierra de 457 mm (18 pulg.), 42 cc
ALL VERSIONS
TOUTES LES VERSION
TODAS LAS VERSIONES
ENGINE FAMILY: *HCPS.0424BD
FAMILLE DE MOTEUR : *HCPS.0424BD
FAMILIA DE MOTOR: *HCPS.0424BD

Questions and Answers

  • I
    Isaiah Wallace DDSAug 1, 2025
    Why does my Homelite UT10640 Chainsaw engine start and accelerate but won't idle, causing the chain to turn?
    • L
      Lauren GonzalezAug 1, 2025
      If your Homelite Chainsaw engine starts, runs, and accelerates, but the chain turns at idle and the engine won't idle, it might be due to the carburetor needing an idle speed adjustment. Try turning the idle speed screw “T” clockwise to increase the idle speed, or counterclockwise to decrease it. Contact an authorized service center for a rebuild kit if needed.
  • J
    Jeremy FordAug 8, 2025
    How to fix a Homelite Chainsaw that starts and runs but won't idle?
    • A
      annette42Aug 9, 2025
      If your Homelite Chainsaw starts, runs, and accelerates but won't idle, it might need a carburetor adjustment. Try turning the idle speed screw “T” clockwise to increase the idle speed. If that doesn't work, try turning the idle speed screw “T” counterclockwise to decrease the speed. If the problem persists, contact an authorized service center for a rebuild kit.
  • S
    Stanley HornAug 17, 2025
    Why is my Homelite Chainsaw bar and chain running hot and smoking?
    • L
      Leon FreemanAug 17, 2025
      Your Homelite Chainsaw's bar and chain might be running hot and smoking due to several reasons: the chain oil tank could be empty (fill it every time you fill the fuel tank), the chain tension might be too tight (adjust it according to the manual's instructions), or the oiler may not be functioning properly. To check the oiler, run the saw at half throttle for 30-45 seconds, then stop it and see if lubricant is dripping from the SAFE-T-TIP® and guide bar. If there's no lubricant, contact an authorized service center. If lubricant is present, the chain may be dull or the bar may be damaged.
  • T
    Tina HooverAug 25, 2025
    What to do if my Homelite UT10640 Chainsaw engine runs but the chain isn't rotating?
    • G
      Gary Santiago Jr.Aug 25, 2025
      If your Homelite Chainsaw engine starts and runs, but the chain isn't rotating, first check if the chain brake is engaged and release it. If the chain brake is not the reason, the chain tension may be too tight, so adjust it. Also, ensure the guide bar and chain are assembled correctly and inspect them for any damage. If the drive sprocket teeth are damaged, contact an authorized service center for drive sprocket replacement.

Homelite UT10640 Specifications

General IconGeneral
Engine Type2-Cycle
Bar Length16 inches
Power OutputUnknown
Weight12.3 lbs
Engine Displacement33cc
Chain Pitch3/8 in
Chain Gauge0.050 inches

Related product manuals