Page 7 of 12
• Fill until the level has reached the Maximum mark on the water level indicator
which is located on the lower front of the unit. DO NOT OVERFILL.
• Ice blocks can also be added which will help cool the water / air.
Place ice in the rear Ice Channel as shown. Do not add water to this area.
Ice can also be added to the Water Filling Tray.
• Do Not Fill with any liquid other than clean cold water. Do Not add any additives
to the water.
• Refit the Cover before turning on.
5 Controls
5.1 Evaporative Cooler
To Next Page
Loading...
