To Next Page
J
Jonathan MoraJul 28, 2025
What to do if Homematic IP Controller has a weak battery?
- MmurphyallisonJul 28, 2025
If your Homematic IP Controller displays a weak battery, replace the old batteries with two new ones.
What to do if Homematic IP Controller has a weak battery?
If your Homematic IP Controller displays a weak battery, replace the old batteries with two new ones.
Why is my Homematic IP Controller command not confirmed?
The command might not be confirmed due to radio interference, the receiver not being reachable, the receiver being unable to execute the command, or the receiver being defective.
What happens if Homematic IP Controller duty cycle exceeded?
If the duty cycle is exceeded, the Homematic IP Controller will start working correctly again after a short period (max. 1 hour).
What to do if Homematic IP Controller transmission failed or duty cycle limit is reached?
If the Homematic IP Controller transmission failed or the duty cycle limit is reached, please try again.
General| Device Type | Controller |
|---|---|
| Communication Protocol | Homematic IP |
| Power Supply | 230 V AC |
| Compatibility | Homematic IP |
| Protection Class | IP20 |
| Wired Communication | No |
| Battery Life | Not applicable |
Details manual purpose, includes symbol explanations for hazards and notes.
Covers device safety, operational limits, user responsibilities, and modification restrictions.
Explains the device's role in the Homematic IP system and its key features.
Describes integration into the Homematic IP smart home ecosystem and control options.
Guides on safe installation requiring electrical expertise and adherence to safety rules.
Details the process of integrating the device into the Homematic IP system via the app.
Addresses issues related to low battery voltage and its operational impact.
Explains command failures due to interference or receiver issues.
Clarifies transmission time limits and their effect on device operation.
Lists device status indicators and their meanings for diagnostics.
Provides steps to reset the device to its original factory configuration.
Outlines basic device maintenance requirements and repair guidance.
Discusses radio transmission, potential interference, and factors affecting range.
Lists key technical parameters: dimensions, power, frequency, and operating range.
Advises on proper procedures for electronic waste disposal.
Explains the CE mark and provides contact information for technical support.
