Homematic IP HmIP-FCI6 User Manual

32
Start-up
It is absolutely essential to ensure that the con-
necting cables are laid so that they are physically
separate from cables carrying mains voltage (e.g.
in separate cable ducts or wiring conduits).
The contact interface is only suitable for con-
necting floating contacts.
Do not connect the connecting cables with 230 V
mains voltage.
5.2 Teaching-in
Please read this entire section before starting
the teach-in procedure.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
To integrate the contact interface into your system and
enable it to communicate with other Homematic IP
devices, you must teach-in the device to your
HomematicIP Access Point first.
To teach-in the contact interface, please proceed as

Homematic IP HmIP-FCI6 Specifications

General

Brand	Homematic IP
Model	HmIP-FCI6
Category	Controller
Language	English