What to do if my Homematic IP Controller is defective?
If the Homematic IP Controller is defective, check your app for any error messages. If the problem persists, contact your retailer for assistance.
How to exit teach-in mode on Homematic IP HmIP-DRSI4 Controller?
To exit the teach-in mode on your Homematic IP Controller, enter the last four numbers of the device serial number to confirm.
General| Product Name | HmIP-DRSI4 |
|---|---|
| Category | Controller |
| Communication | Wireless |
| Radio Frequency | 868 MHz |
| Power Supply | 230 V AC |
| Operating Voltage | 230 V AC |
| Compatibility | Homematic IP |
| Relay Outputs | 4 |
| IP Protection Class | IP20 |
| Mounting | DIN rail |
| Weight | 150 g |
| Frequency | 868.0 - 868.6 MHz |
| Max. Switching Capacity | 16 A |
Covers important warnings regarding device operation, installation, electrical safety, and environmental conditions.
Lists common error codes and flashing patterns with their corresponding meanings and solutions.
Addresses issues where the device does not confirm commands, often due to transmission problems.
To Next Page
