Need help?Do you have a question about the Homematic IP HmIP-FALMOT-C12 and is the answer not in the manual?
General| Input voltage | 24/230 V |
|---|---|
| Input frequency | 50 Hz |
| Power source type | AC, DC |
| Maximum switching capacity | 0.2 W |
| Frequency | 869.65 MHz |
| Cable length | 1.5 m |
| Display type | LCD |
| Product type | Heating actuator |
| Product color | White |
| Built-in display | Yes |
| Channels quantity | 12 channels |
| Maximum outdoor range | 320 m |
| International Protection (IP) code | IP20 |
| Operating temperature (T-T) | 0 - 50 °C |
Weight and Dimensions| Depth | 52 mm |
|---|---|
| Width | 242 mm |
| Height | 85 mm |
| Weight | 440 g |
| Package depth | 281 mm |
| Package width | 184 mm |
| Package height | 97 mm |
| Package weight | 917 g |
Guidance on reading the installation section before starting device setup.
Details on connecting the floor heating actuator to power sources (230V or 24V DC).
Procedure for integrating the floor heating actuator into the smart home system.
To Next Page
