57
Technical specifications
11 Technical specifications
Device short name:
HmIP-DRSI4
Supply voltage: 230 V~/50 Hz
Current consumption: 4 mA max.
Standby power consumption: 280 mW typically (display
lights o)
Relay: NO contact, 1-pole, µ
contact, bistable
Switching voltage: 230 V~
Current carrying capacity
(channel): ∑ 64 A
Power loss of the device
for thermal calculation: 4.1 W max.
Cable type and cross section: rigid and flexible cable,
1.5-2.5 mm²
Installation: mounting rail (DIN rail)
according to EN 60715
Degree of protection: IP20
Ambient temperature: -5 to +40 °C
Dimensions (W x H x D): 72 x 90 x 69 mm (4 WM
width)
Weight: 221 g
Radio frequency band: 868.0-868.60 MHz
869.4-869.65 MHz
Maximum radiated power: 10 dBm
Receiver category: SRD category 2
Typ. open area RF range: 190 m
Duty cycle: < 1 % per h/< 10 % per h
To Next Page
Loading...
