30
Hazard information
Before cleaning the device, unplug it from the
socket outlet. Use a dry linen cloth to clean the
device. If the device is particularly dirty, you can
slightly dampen the cloth to clean it. Do not use
any detergents containing solvents for cleaning
purposes. Make sure that no moisture will ingress
into the housing.
Using the device for any purpose other than that
described in this operating manual does not fall
within the scope of intended use and shall invali-
date any warranty or liability. This also applies to
any conversion or modification work. The device
is intended for private use only.
Do not connect multiple pluggable switch-
es into one another.
Devices with electronic power supply units (e.g.
TV or high voltage LED light sources) are no
ohmic loads. They can generate inrush currents
with more than 100 A. Switching such kind of
loads may lead to premature wear of the actua-
tor.
The device may only be operated within residen-
tial buildings.
To Next Page
Loading...
Need help?
General
