EasyManua.ls Logo

Homematic IP HmIP-SWO-B - User Manual

Homematic IP HmIP-SWO-B
55 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installations- und
Bedienungsanleitung
Installation instruction and
operating manual
Wettersensor – basic S. 2
Weather Sensor – basic
p. 31
HmIP-SWO-B

Table of Contents

Questions and Answers

  • C
    chrisstrongAug 10, 2025
    What to do if Homematic IP Accessories command not confirmed?
    • S
      Susan MckeeAug 10, 2025
      If a command isn't confirmed for your Homematic IP Accessories, it could be due to several reasons. First, radio interference might be preventing the signal from reaching the receiver. You should check if the receiver can be reached. Alternatively, the receiver might be unable to execute the command due to a load failure or mechanical blockade. Finally, the receiver itself could be defective, in which case you should replace it.
  • C
    Caleb NguyenAug 20, 2025
    What to do if Homematic IP Accessories batteries empty?
    • T
      Troy HarrisonAug 20, 2025
      If the batteries of your Homematic IP Accessories are empty, replace them.
  • B
    Bailey HernandezAug 29, 2025
    How to fix weak batteries in Homematic IP Accessories?
    • W
      wisesusanAug 29, 2025
      If the batteries in your Homematic IP Accessories are weak, replace the old batteries with two new ones.

Summary

Information about this manual

Hazard information

Function and device overview

General system information

Mounting

Teaching-in

Replacing batteries

Troubleshooting

Weak batteries

Addresses issues related to low battery voltage and potential transmission problems.

Command not confirmed

Explains what to do when commands are not confirmed and potential causes like interference.

Duty cycle

Explains the legal transmission time limits for devices in the 868 MHz range.

Error codes and flashing sequences

Lists various error codes, their meanings, and recommended solutions for troubleshooting.

Restore factory settings

Maintenance and cleaning

Information regarding the brightness sensor

General information about radio operation

Technical specifications

Homematic IP HmIP-SWO-B Specifications

General IconGeneral
Brightness Measuring Range0 to 100, 000 Lux
Temperature Range-20 to +60 °C
Humidity Range0 to 100% relative humidity
Radio frequency868.3 MHz
Measuring ParametersBrightness
Battery LifeApprox. 2 years

Related product manuals