EasyManuals Logo

Homematic IP HmIP-PS-2 User Manual

Homematic IP HmIP-PS-2
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
38
Restore factory settings
6x long red
flashing
Device defec-
tive
Please see your
app for error mes-
sage or contact
your retailer.
1x orange
and 1 x green
lighting (after
plugging into a
socket)
Test display Once the test dis-
play has stopped,
you can continue.
9 Restore factory settings
The factory settings of the device can be re-
stored. If you do this, you will lose all your set-
tings.
To restore the factory settings of the pluggable switch,
please proceed as follows:
Unplug the device from the socket (see figure 2).
Plug in the device into the socket again while
pressing and holding down the system button
(A) for 4s at the same time, until the LED
(A)
will
quickly start flashing orange (see figure 3).
Release the system button again.
Press and hold down the system button again for
4s, until the status LED lights up green.
Release the system button to finish the proce-
dure. The device will perform a restart.

Other manuals for Homematic IP HmIP-PS-2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Homematic IP HmIP-PS-2 and is the answer not in the manual?

Homematic IP HmIP-PS-2 Specifications

General IconGeneral
BrandHomematic IP
ModelHmIP-PS-2
CategoryAccessories
LanguageEnglish

Related product manuals