beam and low beam based on the following conditions.
1How to Use the Auto High-Beam
In the following cases, the auto high-beam system
may not switch the headlights properly or the
switching timing may be changed. If the automatic
switching operation does not fit your driving habits,
please switch the headlights manually.
• The brightness of the lights from a preceding or
oncoming vehicle is intense or poor.
• Visibility is poor due to the weather (rain, snow,
fog, windshield frost, etc.).
• Surrounding light sources like street lights, electric
billboards, and traffic lights are illuminating the
road ahead.
• The brightness level of the road ahead constantly
changes.
• The road is bumpy or has many curves.
• A vehicle suddenly appears in front of you, or a
vehicle in front of you is not in the preceding or
oncoming direction.
• Your vehicle is tilted with a heavy load in the rear.
• A traffic sign, mirror, or other reflective object
ahead is reflecting strong light toward the vehicle.
• The oncoming vehicle frequently disappears under
roadside trees or behind median barriers.
• The preceding or oncoming vehicle is a motorcycle,
bicycle, mobility scooter, or other small vehicle.
The auto high-beam system keeps the headlight low
beam when:
• Windshield wipers are operating at a high speed.
• The camera has detected a dense fog.
High beam
All of the following conditions must
be met before the high beams turn
on.
●
Your vehicle speed is 25 mph (40
km/h) or more.
●
There are no preceding or
oncoming vehicles with
headlights or taillights turned on.
●
There are few street lights on the
road ahead.
Low beam
One of the following conditions
must be met before the low beams
turn on.
●
Your vehicle speed is 15 mph (24
km/h) or less.
●
There is a preceding or oncoming
vehicle with headlights or
taillights turned on.
●
There are many street lights on
the road ahead.
To Next Page
Loading...
Need help?
General
