Publications No.
Issue Date
INSTALLATION
INSTRUCTIONS
Accessory Application
© 2011 American Honda Motor Co., Inc. – All Rights Reserved. AII 46215 (1112) 1 of 2
08F53-T0A-1000-90
AII 12074
EXHAUST PIPE FINISHER
P/N 08F53-T0A-100
CR-V
DEC 2011
Put this information in the glove box with the vehicle owner’s manual.
PARTS LIST
Exhaust pipe finisher
Washer-bolt
TOOLS AND SUPPLIES REQUIRED
Ratchet
10 mm Socket
Torque wrench
Illustration of the Exhaust Pipe Finisher Installed on
the Vehicle
QA11101AD
EXHAUST PIPE FINISHER
INSTALLATION
NOTE:
• Install the accessory with care not to damage the
vehicle
body and the parts of the vehicle.
• The exhaust pipe finisher is designed exclusively for
the CR-V, it is n
ot applicable to the other models.
• Allow the exhaust pipe to cool down
before installing
the exhaust pipe finisher.
1. Partially thread the washer-bolt into the exhaust pipe
fini
sher. Slide the exhaust pipe finisher onto the
exhaust pipe.
QA11102BD
EXHAUST
PIPE
FINISHER
EXHAUST PIPE
FINISHER
EXHAUST PIPE
WASHER-
BOLT
WASHER-BOLT
Loosely install.
CROSS SECTION
REAR VIEW
EXHAUST PIPE
FINISHER