Honda 08L92-TGS-100 User Manual

Publications No.
Issue Date
INSTALLATION
INSTRUCTIONS
Accessory Application
© 2019 American Honda Motor Co., Inc. – All Rights Reserved. AII13220-10 (1911) 1 of 8
08L92-TGS-1000-90
VERSION 1
TRAILER HITCH 2020 PASSPORT
NOV 2019
PARTS LIST
Trailer Hitch Kit
P/N 08L92-TGS-100
Trailer hitch
Trailer hitch cover
Receiver cover
6 Flange bolts
Ball Mount Kit
P/N 08L92-TGS-100A
Ball mount
Hitch pin
Hitch pin clip
TOOLS AND SUPPLIES REQUIRED
Shop towel
10 mm Open end wrench
Ratchet
Torque wrench
10 mm and 18 mm Sockets
Phillips screwdriver
File
5 mm Hex wrench
The following tools are available through the Honda Tool
an
d Equipment Program. On the iN, click on Service >
Service Bay > Tool and Equipment Program, then enter
the number under “Search.” Or, call 888-424-6857.
• Trim Tool Set (T/N SOJATP2014)
• Plastic Trim Tool (T/N SILTRIMTL10)
• Air saw (T/N AT192A)
Illustration of the Trailer Hitch on the Vehicle
TRAILER HITCH

Honda 08L92-TGS-100 Specifications

General

Brand	Honda
Model	08L92-TGS-100
Category	Automobile Accessories
Language	English

Summary

Trailer Hitch Installation Procedure

Vehicle Preparation and Bumper Removal

Disconnect the vehicle battery and begin removing the rear bumper, wheel arch protectors, and related clips/screws.

Rear Bumper Lower Cover and Connector Handling

Remove the rear bumper lower cover, unplug vehicle connectors, and handle hands-free access unit connectors if equipped.

Optional Hands-Free Tailgate Kit Installation

Install components for the optional Hands-Free Access Power Tailgate Kit, including cutting an access unit and mounting sensor bars.

Trailer Hitch Cover and Hitch Mounting

Attach the trailer hitch cover, reinstall the bumper, and mount the trailer hitch assembly using flange bolts.

Final Steps and System Verification

Check wiring, reinstall components, reconnect the battery, and restore vehicle systems.