43
Maintenance Fundamentals
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety,
but because having a breakdown, or even a
flat tyre, can be a major inconvenience.
Check the following items before you get on
your scooter:
●
Fuel level-Fill fuel tank when necessary.
2
P. 32
●
Throttle-Check for smooth opening and
full closing in all steering positions.
2
P. 69
●
Engine oil level-Add engine oil if necessary.
Check for leaks.
2
P. 59
●
Brakes-Check operation;
●
Lights and horn-Check that lights,
indicators and horn function properly.
●
Side stand ignition cut-off system-Check
for proper function.
2
P. 68
●
Wheels and tyres-Check condition, air
pressure and adjust if necessary.
2
P. 49
Pre-ride Inspection
Front: check brake fluid level and
pads wear.
2
P. 62, 63
Rear: check shoes wear and
freeplay, adjust if necessary.
2
P. 64, 65
Combi Brake: check brake fluid level.
2
P. 62
16 ACG110CBT (PH)-32K20C200.book 43 ページ ２０１５年６月３０日 火曜日 午後２時２３分
To Next Page
Loading...
Need help?
General