56
6. Fill the crankcase with the recommended
grade oil;
0.7L (0.7 US qt, 0.6 Imp qt)
7. Reinstall the oil filler cap/dipstick.
8. Start the engine and let it idle for 3-5
minutes.
9. Stop the engine and wait for 2-3
minutes. Check that the oil level is at
the upper level mark on the oil filler
cap/dipstick with the scooter upright on
firm, level ground. Make sure that there
are no oil leaks.
SPARK PLUG
Refer to the Safety Precautions on page 44.
Recommended plugs:
Standard:
NGK CPR7EA-9
NOTICE
Never use a spark plug with an improper
heat range. Severe engine damage could
result.
1. Remove the engine front cover.
2. Disconnect the spark plug cap (2) from
the spark plug (1).
3. Clean any dirt from around the spark
plug base.
4. Remove the spark plug (1) using the
spark plug wrench furnished in the tool
kit.
(1) Spark plug ¼LikdZ Iyx½
(2) Spark plug cap ¼LikdZ Iyx dSi½
(1)
(2)
To Next Page
Loading...
Need help?
General