#
Maintenance indicator
The indicator is turned on whenever the
running distance reaches the programmed
maintenance interval.
When the maintenance indicator is appeared,
reset the indicator after performing the
periodic maintenance.
(P.78)
u The maintenance indicator is appeared for
the first time when the running distance
reaches 1,000 km (621 miles).
u The maintenance indicator is appeared
when the running distance reaches every
12,000 km (7,458 miles) after first indication
was reset.
u The indicator does not go off until it is reset.
If the periodic maintenance is performed
before the maintenance indicator comes on,
be sure to reset the maintenance indicator
after performing the periodic maintenance.
To reset the maintenance indicator
(P.30)
You can also check the remaining distance to
next interval of the maintenance.
To check the remaining distance (P.30)
20221109171351_32K2LA000_eng_BOOK Page 32 Wednesday, November 09 2022 17:20:28 JST
Operation Guide
29
Continued
Maintenance indicator
To Next Page