#
To check the remaining distance
You can check the remaining distance to next
interval of the oil change and maintenance.
When the function switch is pressed, each
remaining distance appears briefly.
#
To reset the oil change indicator and
maintenance indicator
a
Press and hold the function switch while
the ignition switch to the (On) position and
keep holding the function switch until the
oil change indicator and remaining distance
start flashing.
u The button is not pressed for about 30
seconds, the control is automatically
switched the ordinary display.
20221109171351_32K2LA000_eng_BOOK Page 33 Wednesday, November 09 2022 17:20:28 JST
Operation Guide
30
Instruments (Continued)
Remaining
oil change
distance
Remaining
maintenance
distance
To Next Page
Loading...
