Need help?Do you have a question about the Honda BF50 Series and is the answer not in the manual?
General| Fuel Delivery | Programmed Fuel Injection (PGM-FI) |
|---|---|
| Starting System | Electric |
| Trim Range | -4° to +16° |
| Lubrication | Wet Sump |
| Steering | Remote |
| Displacement | 808 cc |
| HP Rating | 50 HP |
| Exhaust | Through Propeller |
| Cooling System | Water-cooled |
| Recommended Fuel | Unleaded gasoline (86 octane or higher) |
| Fuel Tank Capacity | External |
| Shaft Length | L: 508 mm (20") |
| Power Trim & Tilt | Yes |
Details engine type, displacement, bore, stroke, power, torque, and dimensional data.
Essential safety warnings and symbols to observe during operation and service.
Specifications for wear limits and tolerances for engine and component parts.
Required torque values for various bolts and nuts during assembly and repair.
Diagram illustrating the electrical connections and components of the outboard motor.
Guides for diagnosing and resolving common engine starting and performance problems.
Recommended service intervals for routine maintenance based on time or usage.
Instructions for draining, checking, and refilling engine oil.
Procedure for checking and adjusting valve clearances when the engine is cold.
Procedures for adjusting idle speed and other carburetor settings.
Step-by-step instructions for safely removing the engine from the motor.
Detailed procedures for cylinder head disassembly, valve inspection, and replacement.
Detailed steps for disassembling and servicing the crankshaft, piston, and connecting rod.
Explanation of how the power train operates in Forward, Neutral, and Reverse.
To Next Page
