Need help?Do you have a question about the Honda BF40A and is the answer not in the manual?
General| Horsepower | 40 HP |
|---|---|
| Starting System | Electric |
| Gear Ratio | 2.08:1 |
| Trim Range | -4° to +16° |
| Lubrication | Wet Sump |
| Displacement | 808 cc |
| Full Throttle RPM Range | 5, 000-6, 000 RPM |
| Cooling System | Water-cooled |
| Exhaust | Through propeller hub |
| Propeller | Optional |
| Recommended Fuel | Unleaded gasoline |
| Gear Shift | Forward, Neutral, Reverse |
| Shaft Length | 20" (L), 25" (XL) |
| WOT Range | 5, 000-6, 000 RPM |
| Steering | Remote |
| Trim Method | Power Trim & Tilt |
Discusses the importance of safety information and signals.
Identifies the location of important safety labels on the outboard motor.
Illustrates and labels the locations of major components and controls.
Describes the function and use of instruments like trim meter and tachometer.
Details pre-operation inspection steps to ensure the motor is in good condition.
Step-by-step guide for starting the engine, covering different model types.
Explains how to shift gears and control throttle for different models.
A detailed schedule outlining required maintenance tasks and intervals.
Instructions for inspecting, measuring gap, and replacing spark plugs.
How to clean and flush the motor, especially after use in salt or dirty water.
Comprehensive guide to diagnose and resolve engine starting problems.
Explains causes and solutions for engine overheating issues.
Detailed technical specifications for BF40A and BF50A models.
Outlines the terms and conditions of the limited warranty.
To Next Page
