31
Fuel Priming BulbFuel Filler Cap Vent Knob
(optional equipment)
CONTROLS AND FEATURES
PRIMING BULB
INLET END
(TANK)
OUTLET END
(MOTOR)
UP
VENT KNOB
FUEL FILLER CAP
OOPPEENN
CCLLOOSSEE
A priming bulb is built into the fuel
hose that connects the fuel tank to the
outboard motor.
The cap is provided with a vent knob
to seal the portable fuel tank for
carrying it to and from the boat.
Open the vent knob 2 or 3 turns
before starting the engine. Before starting the engine, hold the
priming bulb up in the direction of
the arrow, then squeeze the priming
bulb until it feels firm. This will
ensure that fuel is supplied to the
engine.
05/02/22 10:49:39 31ZW3600_032
To Next Page
Loading...
