SYMBOLS
The symbols used
throughout
this manual show specific service procedures.
If
supplementary
information
is required
pertaining
to
these
symbols,
it
would
be
explained
specifically
in
the
text
without
the
use
of
the
symbols.
I
~
s
I
Replace the part(s)
with
new
one(s) before assembly.
~
Use recommended engine oil, unless otherwise specified.
-,
Use molybdenum oil solution (mixture
of
the engine oil and
molybdenum
grease in a ratio
of
1:
1).
- s;;;li
Use multi-purpose grease (Lithium based multi-purpose grease NLGI # 2
or
equivalent).
Use molybdenum disulfide grease (containing more than 3 %
molybdenum
.
•i
,,., .
~
equivalent).
Example: Molykote®
BR-2
plus manufactured by Dow Corning,
U.S.
A.
Multi-pL1rpose M-2 manufactured by Mitsubishi Oil, Japan
Use molybdenum
disulfide paste (containing more than
40
%
molybdenum
disulfide, NLGI # 2 or
equivalent).
~
Example: Molykote® G-n paste, manufactured by Dow Corning,
U.S.
A.
Honda
Moly
60
(U.S.
A.
only)
Raco! ASP manufactured by Roca! Limited,
U.
K.
Rocol Paste manufactured by Sumico Lubricant, Japan
~
Use
silicone
grQaSQ.
~
Apply~
locking agent. Use a
middle
strength locking agent unless otherwise specified .
..-''~
Apply
sealant.
I
Use
DOT
4 brake fluid. Use the recommended brake fluid unless otherwise specified .
...
Use Fork
or
Suspension Fluid.
To Next Page
