Honda C8R600F4 - Wheels;Tires; Steering Head Bearings

WHEELS/TIRES
NOTE:
Tire pressure should be checked when the tires are
COLD.
Check the tire pressure with the tire pressure gauge.
RECOMMENDED TIRE PRESSURE:
Up to 90 kg (200 lbs) load:
Front: 250 kPa (2.50 kgf/cm
2
,
36 psi)
Rear: 290 kPa (2.90 kgf/cm
2
,
42 psi)
Up to maximum weight capacity:
Front: 250 kPa (2.50 kgf/cm
2
, 36 psi)
Rear: 290 kPa (2.90 kgf/cm
2
,
42 psi)
Check the tires for cuts, embedded nails, or other
damage.
Check the front and rear wheels for trueness (refer
to section 13 and 14).
Measure the tread
depth at the center of the tires.
Replace
the tires when the tread depth reaches the
following limits.
MINIMUM TREAD DEPTH: Front: 1.5 mm (0.06 in)
Rear: 2.0 mm (0.08 in)
STEERING HEAD BEARINGS
NOTE:
Check that the control cables do not interfere with
handlebar rotation.
Raise the
front wheel off the ground and support
the motorcycle securely.
Check that the handlebar moves freely from side to
sirle.
If the handlebar moves unevenly, binds, or has ver-
tical
movement, inspect the steering head bearings
(section 13).
MAINTENANCE
3-27