Honda CB110C3M - Seat

50
Maintenance
Removing & Installing Body Components
►
Seat
Prongs
Seat
Stays
Ignition key
Seat lock
Seat
#
Removal
1. Insert the ignition key into the seat lock.
2. Turn it clockwise, then pull the seat up and back.
#
Installation:
1. Insert the prongs into the stays on the frame.
2. Push forward and down on the rear of the seat
until it locks in place.
Make sure that the seat is locked securely in
position to pull it up lightly.
The seat locks automatically when closed.
Take care not to lock your key in the
compartment under the seat.