Honda CB110C3M - Page 71

69
Maintenance
Side Stand
►
Adjusting the Drive Chain Slack
Lock nut
Adjusting nut
Scale
graduations
Rear edge of
adjusting slot
Adjusting the Drive Chain
Slack
Adjusting the chain requires special tools.
Have the drive chain slack adjusted by your
dealer.
1.
Shift the transmission to Neutral. Stop the
engine.
2.
Place your vehicle on its centre stand on a
firm, level surface.
3.
Loosen the rear axle nut.
4. Loosen the lock nuts on both adjusting bolts.
continued
Adjusting nut
Lock nut
Axle nut