87
Electrical Trouble
u
Burned-out Light Bulb
#
Headlight bulb
1. Remove the headlight case.
2
P. 49
2.
Remove the rubber dust cover.
3.
P
ress the pin down and pull out the bulb
without turning it.
4. Install a new bulb and parts in the reverse
order of removal.
u
Install the dust cover with its “TOP”
mark facing up.
Do not touch the glass surface with your fingers.
If you touch the bulb with your bare hands,
clean it with a cloth moistened with alcohol.
#
Brakelight/Taillight Bulb
1. Remove the taillight lens by removing the
screws.
2.
Slightly press the bulb and turn it
counterclockwise.
3. Install a new bulb and parts in reverse
order of removal.
Rubber dust
cover
Pin
Bulb
“TOP” mark
continued
Bulb
Lens
Screws
To Next Page
