Need help?Do you have a question about the Honda CB350K4 and is the answer not in the manual?
General| Compression Ratio | 9.0:1 |
|---|---|
| Power Output | 36 hp @ 10, 500 rpm |
| Ignition | Battery and coil |
| Transmission | 5-speed |
| Final Drive | Chain |
| Front Suspension | Telescopic fork |
| Front Brake | Single disc |
| Rear Brake | Drum |
| Rear Tire | 3.50-18 |
| Seat Height | 790 mm |
| Ground Clearance | 150 mm |
| Fuel Capacity | 12 liters |
| Fuel System | Carburetor |
| Rear Suspension | Swingarm with dual shock absorbers |
| Width | 780 mm |
| Weight | 160 kg |
Highlights the key features and design aspects of the engine.
Describes the engine's power transmission mechanics and components.
Step-by-step guide for removing the engine from the motorcycle.
Step-by-step guide for reinstalling the engine onto the motorcycle.
Details the engine's valve train, including its operation and components.
Covers the description, disassembly, inspection, and reassembly of pistons and cylinders.
Explains the cam chain tensioner's function, disassembly, and inspection.
Details the engine's oil lubrication system, including its components and operation.
Explains the clutch system, its components, disassembly, and inspection.
Covers the crankshaft and connecting rod's description, disassembly, and inspection.
Details the transmission system, including its description, disassembly, and inspection.
Explains the gear shift mechanism, its disassembly, and inspection.
Details the kick starter system, its components, disassembly, and inspection.
Covers the description, disassembly, inspection, and reassembly of the crankcases.
Explains the carburetor's function, disassembly, and inspection procedures.
Covers the handlebar's description, disassembly, inspection, and reassembly.
Details the fork top bridge, its description, disassembly, and reassembly.
Explains the front suspension (piston type), its description, disassembly, and inspection.
Details the steering stem, its description, disassembly, inspection, and reassembly.
Covers the fuel tank's description, disassembly, inspection, and reassembly.
Describes the motorcycle's frame construction and its main components.
Explains the seat's description, disassembly, inspection, and reassembly.
Details the stand and brake pedal mechanisms, their disassembly, and inspection.
Covers the description, disassembly, inspection, and reassembly of exhaust components.
Explains the air cleaner system, its description, disassembly, and inspection.
Details the rear fork and fender assembly, their disassembly, and inspection.
Explains the rear suspension, its description, operation, disassembly, and inspection.
Covers the front wheel's description and tire recommendation.
Details the rear wheel's description, disassembly, inspection, and reassembly.
Covers the ignition system's description, components, and troubleshooting.
Details the generator system, its description, performance, and reassembly.
Explains the rectifying system (selenium rectifier), its description, and testing.
Covers the battery's description, removal, inspection, and charging.
Details the starting motor system, its description, disassembly, inspection, and armature test.
Lists and describes safety equipment like horn and speedometer.
Explains the various switches (ignition, stoplight, starter, turn signal) and their operation.
Electrical wiring schematic for the CB250K4 (U.K. Type).
Electrical wiring schematic for the CB350K4 (U.S.A. Type).
General electrical wiring schematic for the CB350K4 model.
Electrical wiring schematic for the SL350K2 (U.S.A. Type).
Electrical wiring schematic for the CB350G (U.S.A. Type).
Scheduled maintenance intervals and tasks for the motorcycle.
Specifies torque values for various fasteners during maintenance.
Guides for diagnosing and resolving common engine and vehicle issues.
To Next Page
