Need help?Do you have a question about the Honda CB350F-CB400F and is the answer not in the manual?
General| Compression Ratio (CB350F) | 9.3:1 |
|---|---|
| Compression Ratio (CB400F) | 9.4:1 |
| Fuel System | 4 x Keihin carburetors |
| Ignition | Battery and coil |
| Transmission | 5-speed |
| Final Drive | Chain |
| Front Suspension | Telescopic fork |
| Front Brake | Single disc |
| Rear Brake | Drum |
| Engine | Air-cooled, 4-stroke, transverse four-cylinder |
| Displacement (CB350F) | 347 cc |
| Displacement (CB400F) | 408 cc |
| Bore x Stroke (CB350F) | 47.0 mm x 50.0 mm |
| Bore x Stroke (CB400F) | 51.0 mm x 50.0 mm |
| Max Power (CB400F) | 37 hp (27.5 kW) @ 8, 500 rpm |
| Frame | Steel tube |
| Rear Suspension | Dual shock absorbers |
Lists essential guidelines for performing motorcycle maintenance and repairs correctly.
Details the procedure for inspecting and adjusting valve tappet clearance.
Covers the inspection and adjustment of breaker points and ignition timing.
Explains how to check and synchronize carburetors, including idle speed adjustment.
Outlines the inspection and adjustment of the clutch lever and cable play.
Describes the inspection and adjustment of the cam chain tensioner.
Details how to check and change the engine oil level.
Covers checking the front brake fluid level, adjusting calipers, and bleeding the brake.
Explains how to adjust the rear brake pedal's free travel.
Instructions for inspecting and cleaning the air cleaner element.
Details checking and adjusting the drive chain tension.
Procedures for changing the front fork oil.
Lists engine parts that can be serviced while mounted on the vehicle.
Provides a diagram and preliminary steps for removing and installing the engine.
Step-by-step instructions for disassembling engine components like the cylinder head and cam chain.
Inspection of cylinder head and camshaft components.
Inspection procedures for pistons and related parts.
General overview of engine reassembly steps.
Instructions for installing piston rings onto pistons.
Detailed instructions for measuring cylinder dimensions.
Procedures for inspecting the cylinder head.
Procedures for checking and adjusting valve timing.
Instructions for applying sealant and installing the cylinder head cover.
Details the function and components of the oil pump and oil filter systems.
Explains the components and disassembly process for the clutch assembly.
Details the disassembly, inspection, and reassembly of the kick starter mechanism.
Explains the disassembly, inspection, and reassembly of the gear shift mechanism.
Details the disassembly, inspection, and reassembly of the transmission gears.
Explains the disassembly, inspection, and reassembly of the primary shaft.
Details the disassembly, inspection, and reassembly of the cam chain tensioner.
Covers disassembly, inspection, and reassembly of the crankshaft and connecting rods.
Details the disassembly, inspection, and reassembly of the crankcase.
Explains the disassembly, inspection, and reassembly of the carburetor assembly.
Details the disassembly, inspection, and reassembly of the front wheel.
Covers disassembly, inspection, and reassembly of the front disc brake system.
Details disassembly, inspection, and reassembly of the rear wheel and brake.
Covers disassembly, inspection, and reassembly of the steering handlebar assembly.
Details the disassembly, inspection, and reassembly of the steering stem.
Explains the disassembly, inspection, and reassembly of the front suspension forks.
Covers disassembly, inspection, and reassembly of the rear suspension.
Details the removal and installation of frame components like the fuel tank and seat.
Provides an overview of the electrical system and its main components.
Details the ignition system, including spark plugs, ignition coils, and capacitors.
Explains the charging system, including the A-C generator, rectifier, and regulator.
Covers the starting system, including the starter motor and its components.
Details various electrical components like switches, horn, and lamps.
Lists special tools required for servicing the motorcycle with their reference numbers.
Provides a schedule for regular maintenance intervals and checks.
Lists torque specifications for various engine and frame components.
Contains detailed service data and specifications for engine components.
Offers solutions for common engine, chassis, and electrical problems.
Presents the complete wiring diagram for the motorcycle.
Lists general specifications for the motorcycle, including dimensions and engine details.
Describes a technical feature related to the blow-by gas circulator system.
Checks and adjusts clutch lever play.
Checks rear brake alignment and wear.
Checks tire tread depth.
Inspects and adjusts spark plug gap.
Checks and cleans the fuel filter.
Instructions for cleaning and servicing the air cleaner.
Checks front suspension for proper operation and damage.
Inspects rear suspension components for wear and looseness.
Inspects the side stand assembly for wear and proper operation.
Instructions for installing piston rings onto pistons.
Explains the components and disassembly process for the clutch assembly.
Provides instructions for gearshift mechanism disassembly and installation.
Lists carburetor settings, including main jet, slow jet, and float height.
Details the disassembly and assembly of the front suspension fork.
To Next Page
