Need help?Do you have a question about the Honda CB900C and is the answer not in the manual?
General| Displacement | 901cc |
|---|---|
| Bore x Stroke | 64.5 mm x 69 mm |
| Compression Ratio | 8.8:1 |
| Final Drive | Shaft |
| Front Suspension | Telescopic fork |
| Front Brakes | Dual disc |
| Front Tire | 3.50-19 |
| Fuel System | 4x 32mm Keihin CV carburetors |
| Transmission | 5-speed |
| Rear Suspension | Twin shocks |
| Rear Brakes | Single disc |
| Seat Height | 810 mm (31.9 in) |
Torque settings for various engine mounting bolts and components.
Torque settings for chassis components like steering and suspension.
Recommended service intervals and tasks for the motorcycle.
Procedure to measure valve clearance using a feeler gauge.
Steps for adjusting valve clearance using shims and special tools.
Torque specifications for engine mounting bolts and related components.
Step-by-step instructions for removing the engine from the motorcycle.
Step-by-step instructions for installing the engine into the motorcycle.
Steps for removing and installing the front wheel assembly.
Comprehensive service guide for front fork removal, installation, and disassembly.
Complete wiring diagram for electrical systems and components.
To Next Page
