To remove the seat ( ), insert the ignition
key into the seat lock ( ) and turn it
clockwise. Pull the seat lock lever ( )
downward to unlock the seat. Pull the seat
back and up.
To install the seat, put in the hooks ( )
under the fuel tank and insert the prong ( )
into the fuel tank stay ( ).
Push forward and then down on the rear of
the seat.
(1)2(4)
(5)
(2)
(3)(6)
1
3
4
5
6
(1) Seat
(2) Seat lock
(3) Lock lever
(4) Hooks
(5) Front Prong
(6) Fuel tank stay
SEAT
Be sure the seat is locked securely in
position after installation.
38
03/11/13 10:48:28 32KPF600_044
To Next Page
