(Refer to the maintenance precautions on
page ).
Be sure to turn the ignition switch OFF
when replacing the bulb.
Do not use bulbs other than that specified.
After installing a new bulb, check that the
light operates properly.
57
BULB REPLACEMENT
The light bulb becomes very hot while
the light is ON, and remain hot for a
while after it is turned OFF. Be sure
toletitcooldownbeforeservicing.
Do not put finger prints on the
headlight bulb, as they may create hot
spots on the bulb and cause it to
break.
Wear clean gloves while replacing the
bulb.
If you touch the bulb with your bare
hands, clean it with a cloth moistened
with alcohol to prevent its early
failure.
89
03/10/23 11:16:39 32KPF600_095
To Next Page
